iTranslated by AI
Essential Phone Unboxing and Android P Update
I managed to get the Essential Phone at a bargain price during Amazon Prime Day in the US. I had been attracted to the Essential Phone for its design and concept, and since the overseas version properly complies with Japanese technical standards (技適), I decided to buy it.
Initially, it was scheduled to arrive on August 2, but it arrived much earlier on July 24. So I immediately unboxed it and updated it to Android P.
Since the Essential Phone is one of the few devices that can participate in the Android P Beta test, I went straight from unboxing → power on → update!
Prior Information
I referred to this article, and according to it, there are two methods to apply the update:
- OTA version: Updates the existing image without wiping data.
- Fastboot version: Installs a fresh environment after wiping data.
There was a scary note about the Fastboot version not being able to use WiFi, but that article was written during the Developer Preview period for the Essential Phone Android P. Currently, Beta 2 has been released. Looking at the release notes, both Developer Preview 1 and 2 list:
- Wi-Fi Hotspot does not stay on
However, this issue is not listed for the Beta.
Since Android P is about to be released, I figured such a major bug wouldn't remain, and it's not explicitly stated that it persists (though it doesn't say it's fixed either!). So I decided to go with the Fastboot version (flimsy reasoning!).
In conclusion, the Fastboot version worked fine, and WiFi is also connected properly (though I had to authenticate WiFi twice during initialization, which makes me a bit uneasy). So it should probably be okay.
Here’s a simple summary of the steps.
Preparation
First, sign up for the Beta test at the following site:
https://www.essential.com/developer/developer-preview
Enter the required information, and after submitting, download the Fastboot version image from the link provided.

Preparation on the Device
On the device, you need to make the following three changes:
- Enable Developer mode
- Enable OEM Unlocking
- Enable USB Debugging
To enable Developer mode, go to Settings → System → About phone, and tap "Build number" at the bottom seven times.
Then go back one screen; a Developer options menu will appear in Settings. Perform steps 2 and 3 there.
Installing ADB and Fastboot Related Tools
Recently, Google no longer provides a standalone installer for the Android SDK.
Therefore, to install ADB and other tools, you need to install either Android Studio or Visual Studio. Either is fine, but don't forget to install the following along with it:
- Android SDK Platform-Tools
- Google USB Driver
By default, the necessary files are installed in "%USERPROFILE%\AppData\Local\Android\Sdk\platform-tools". Open that folder in a command prompt.
Starting Fastboot Mode
Now, restart the device and hold down the volume down button during startup. A black screen should appear with Fastboot-related information displayed.
That screen is the Fastboot mode screen. You will access it multiple times, so don't forget how to enter it.
Here, check if the driver for connecting to the Fastboot screen is correctly installed.
Navigate to the platform-tools folder (e.g., %USERPROFILE%\AppData\Local\Android\Sdk\platform-tools) in the command prompt and execute the following command:
> fastboot devices
PM1LHMAxxxxxxxxxxxxx fastboot
If the connected device information appears, it's OK. If not, you need to install the driver.
Open Device Manager; there should be an unrecognized device (probably showing something like "Mata?"). Manually specify the driver location to install it. Refer to this blog for details:
The driver location is typically at %USERPROFILE%\AppData\Local\Android\Sdk\extras\google\usb_driver.
Select "Android Bootloader Interface" as the driver to install (unlike the linked article, this is correct; "Composite" might also work but hasn't been tested). After installing, run fastboot devices again from the command prompt; you should see the connected device.
Unlocking the Bootloader
Next, unlock the bootloader to flash the image. Follow these steps:
- In Fastboot mode, connect the device to your PC via USB, and execute
fastboot flashing unlockfrom the command prompt. - A confirmation appears on the device asking if you want to unlock. Use the volume up/down buttons to select "Yes" and press the power button.
- The device will reboot after execution, but ensure you press the volume down button immediately to enter Fastboot mode again.
- Once in Fastboot mode, execute
fastboot flashing unlock_criticalfrom the command prompt. - Another confirmation screen appears; select "Yes" and let the device reboot, then re-enter Fastboot mode.
Unlocking is now complete.
Flashing the Android P Image
Now, extract the downloaded "PH1-Images-PPR1.180610.030.zip". Inside, you'll find "flashall.bat". Open a command prompt in that path. Make sure the fastboot command is in your PATH. Double-check that the device is properly connected by running fastboot devices. Now, let's flash the image.
- Execute "flashall.bat"
That's it!
After flashing, immediately re-enter Fastboot mode. If you accidentally boot the OS and set it up, the settings will be wiped on the next lock, so don't make the same mistake I did.
Re-locking the Device
While in Fastboot mode, execute the following two commands:
fastboot flashing lockfastboot flashing lock_critical
That completes the installation of Android P on your Essential Phone! Now, enjoy the world of Android P.
Ah, I'm sleepy. It's 2:10 AM. I've been so focused on upgrading to P and writing this blog that I've barely touched the phone. Putting the cart before the horse!
That's all!
Discussion