iTranslated by AI
Causes and Solutions for Mac Waking Up From Sleep Unexpectedly
Putting a Mac to sleep offers more benefits than shutting it down, so for daily use, I often "turn off the power" by putting it to sleep.
There seem to be several advantages:
- You can immediately return to the state before sleep and resume work.
- Since it uses an SSD, physical wear is minimal, making the benefits of shutting down negligible.
- Power consumption in sleep mode is sufficiently low (about 4.54 yen per month for M1) *1.
- iCloud syncing and Time Machine backups are automatically executed even during sleep.
- The Safe Sleep feature saves the state of open apps and documents *2.
- *1 Calculated at 0.18W per hour, based on Japanese household electricity rates of 35 yen/kWh.
- *2 What is safe sleep on your Mac? - Apple Support
However, for some reason, the Mac would wake up from sleep in less than a minute.
Since I had "Require password after sleep or screen saver begins" set to "immediately" in "Security & Privacy," there was no security risk, but the screen would turn on repeatedly in the middle of the night, and devices connected to the Mac would be powered on.
- 4 Reasons Why You Don't Have to Shut Down Your Mac | Lifehacker Japan
- Sleep is OK!! — Did you know it's better not to shut down your Mac?
- Why are electricity rates rising in June 2023? How much will they be? | Special Content | Agency for Natural Resources and Energy
The Cause was a Bluetooth Mouse
To get straight to the point, the "MX ERGO" connected via Bluetooth was the cause. This seems to be a phenomenon frequently seen among users of Logitech (Logicool) mice.
Since the MX ERGO has an Easy-Switch button to toggle between paired devices, I solved it by switching to a second pairing slot that wasn't registered to anything (though it is a bit of a hassle).
Other Solutions
I referred to this article, and it seems there is also a method using an app called "FluTooth."
How to investigate and solve the cause of automatic wake-up on Mac mini (M2) | Blog Hack
FluTooth is available for free on Gumroad. While similar solutions using scripts have been proposed, they have the drawback that the keyboard and mouse cannot be used immediately after waking up, so it's not a fundamental solution. MacBook users should be cautious.
As mentioned in that article, it might not be a perfect solution, but using "FluTooth" could be an option if you cannot easily disconnect the device from your Mac.
- The app "FluTooth," which can turn off Bluetooth before sleep to prevent battery drain occurring on macOS 12 Monterey MacBook Air/Pro, has been released.
- 🤧 FluTooth - Close MacBook, Turn off Bluetooth
Checking the Logs
You can check the logs by running the following command in the terminal after the Mac has woken up from sleep.
sudo pmset -g log
The initial Display is turned off indicates that the display went dark, so sleep mode was active.
In the fourth log entry, Bluetooth LE HID Activity appeared. When I asked ChatGPT, it suggested that this might be the cause.
It indicates that there was activity from a Bluetooth device. This suggests that a Bluetooth keyboard, mouse, or other HID (Human Interface Device) detected some input, which may have triggered the wake from sleep.
Time stamp Domain Message Duration Delay
========== ====== ======= ======== =====
UUID: xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxxxxxxxxxx
2024-01-06 02:52:16 +0900 Notification Display is turned off
...
2024-01-06 02:52:16 +0900 Assertions PID xxx(bluetoothd) Summary UserIsActive "Bluetooth LE HID Activity" 00:12:14 id:xxxxxxxxxxxx [System: PrevIdle DeclUser SRPrevSleep IPushSrvc kCPU kDisp]
Fortunately (?), the only device I had connected via Bluetooth was the mouse, so by disconnecting it from the Mac, I was able to resolve the issue of it waking up from sleep.
Discussion